BS EN 10149-2-1996 Specification for Hot-rolled flat products made of high yield strength steels for
|
ID： |
3E360ED0FEF34579AD6271D3CAB2FD93 |
|
文件大小(MB)： |
0.17 |
|
页数： |
12 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10149-2:1996,Incorporating,Amendment No. 1,Specification for,Hot-rolled flat products,made of high yield,strength steels for,cold forming —,Part 2: Delivery conditions for,thermomechanically rolled steels,The European Standard EN 10149-2:1996 has the status of a,British Standard,ICS 77.140.50,BS EN 10149-2:1996,This British Standard, having,been prepared under the,direction of the Engineering,Sector Board, was published,under the authority of the,Standards Board and comes,into effect on,15 April 1996,. BSI 09-1999,The following BSI references,relate to the work on this,standard:,Committee reference ISE/10,Draft for comment 93/307663 DC,ISBN 0 580 25433 X,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted to Technical,Committee ISE/10, Flat rolled steel products, upon which the following bodies,were represented:,British Railways Board,British Steel Industry,Cold Rolled Sections Association,Society of Motor Manufacturers and Traders Ltd.,The following bodies were also represented in the drafting of the standard,through subcommittees and panels:,British Welded Steel Tube Association,Coated Metals Limited,Department of the Environment (Property Services Agency),International Tin Research Institute,Metal Roof Deck Association,National Association of Steel Stockholders,National Centre of Tribology,Paintmakers’ Association of Great Britain Ltd.,Zinc Development Association,Amendments issued since publication,Amd. No. Date Comments,9546 July 1997 Indicated by a sideline in the margin,BS EN 10149-2:1996,. BSI 09-1999 i,Contents,Page,Committees responsible Inside front cover,National foreword ii,Foreword 2,Text of EN 10149-2 3,BS EN 10149-2:1996,ii . BSI 09-1999,National foreword,This British Standard has been prepared under the direction of Technical,Committee ISE/10 and is the English language version of EN 10149-2 Hot-rolled,flat products made of high yield strength steels for cold forming — Part 2:1995,Delivery conditions for thermomechanically rolled steels, published by the,European Committee for Standardization (CEN).,This British Standard supersedes BS 1449-1.4:1991 and BS 1449-1.10:1991,which are withdrawn.,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Cross references,Publication referred to Corresponding British Standard,EN 10149: BS EN 10149 Specification for hot-rolled flat products,made of high yield strength steels for cold forming,EN 10149-1:1995 Part 1:1996 General delivery conditions,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN title page, pages 2 to 7 and a back cover.,This standard has been updated (see copyright date) and may have had,amendments incorporated. This will be indicated in the amendment table on the,inside front cover.,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10149-2,September 1995,ICS 77.140.10; 77.140.50,Descriptors: Iron and steel products, hot rolled products, high yield strength steels, cold-working, metal rolling, designation,classifications, grades: quality, chemical composition, delivery condition, mechanical properties, inspection, tests, marking,English version,Hot-rolled flat products made of high yield strength steels,for cold forming —,Part 2: Delivery conditions for thermomechanically rolled,steels,Produits plats laminés à chaud en aciers à,haute limite d’élesticité pour formage à,froid —,Partie 2: Conditions de livraison des aciers,obtenus par laminage thermomécanique,Warmgewalzte Flacherzeugnisse aus St鋒len,mit hoher Streckgrenze zum Kaltumformen —,Teil 2: Lieferbedingungen für,thermomechanisch gewalzte St鋒le,This European Standard was approved by CEN on 1995-08-06. CEN members,are bound to comply with the CEN/CENELEC Internal Regulations which,stipulate the conditions for giving this European Standard the status of a,national standard without any alteration.,Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any,CEN member.,This European Standard exists in three official versions (English, French,German). A version in any other language made by translation under the,responsibility of a CEN member into its own language and notified to the,Central Secretariat has the same status as the official versions.,CEN members are the national standards bodies of Austria, Belgium,Denmark, Finland, Fran……
……